Recommended
60UV-K UV DTF Crystal Label Printer with Laminating (Premium)
- Three or four I3200 heads, 2400DPI
- Heavy frame: a coin stays standing throughout the stability test
Choose equipment by application
Pick an application to see its machines. Not sure which one fits? Ask us for a recommendation.
58 products
DTF Printers
60F3 3-Head DTF T-shirt Printer with Foil Flocking
The 60F3 is a 600mm DTF T-shirt printer with three Epson I1600 heads and a Hoson board, printing at 2400DPI, about 4.5㎡/h in 10-pass mode with mixed ink. One machine handles both CMYK plus white transfers and spot foil with flocking, and it pairs with the 60R-N smoke-purifying auto powder-recovery shaker.
- Print width
- 600mm
- Print heads
- I1600 head × 3
- Colours
- CMYK + white
DTF Printers
TU60F4-T 3D Embroidery DTF Printer
The TU60F4-T 3D embroidery printer runs three or four 3200U1 heads with a Hoson board. It prints DTF ink on DTF PET film for heat-press transfer, producing 3D embroidery effects at about 5–6㎡/h and raised 3D foam designs at about 2–3㎡/h on garments, caps, shoes, bags and cushions.
- Print heads
- 3200U1 head × 3 or × 4
- Model
- TU60F4-T
- Speed
- 3D embroidery: 5–6㎡/h; 3D foam: 2–3㎡/h
DTF Printers
T3000 A2 DTF Printer with Auto Powder-Recovery Shaker (Deluxe)
The T3000 deluxe auto model is a 420mm A2 DTF printer that takes two I1600, I3200 or F1080 heads with a Hoson board, printing at 2880DPI and about 7.5㎡/h in production mode with I3200 heads. It pairs with the A2 auto powder-recovery shaker, which recycles powder, bakes in a mesh-belt tunnel and fits 80cm doorways.
- Print width
- 420mm
- Print heads
- I1600 / I3200 / F1080 head × 2
- Colours
- CMYK + white
DTF Printers
60E6-K 6-Head High-Speed DTF T-shirt Printer
The 60E6-K is a 600mm high-speed DTF T-shirt printer with six staggered I3200 heads (two base colour, two spot colour, two white) and a Hoson board, printing at 2400DPI, about 47㎡/h in 3-pass and 23㎡/h in 6-pass mode. It adds head moisturising and breakpoint resume, and pairs with the 60R-N auto powder-recovery shaker with an activated-carbon purifier.
- Print width
- 600mm
- Print heads
- I3200 head × 6
- Colours
- CMYK + white
DTF Printers
A3 DTF Printer (Single HD3200 Head) with Shaker
The A3-HD3200 is a 300mm DTF printer with one new Epson-authorised HD3200 head and a Hoson board, printing at 2400DPI, about 2.8㎡/h in 6-pass and 2.1㎡/h in 8-pass mode with CMYK plus white pigment ink. It pairs with a smart shaker and suits small, personalised runs and new DTF businesses.
- Print width
- 300mm
- Print heads
- HD3200 head × 1
- Colours
- CMYK + white
DTF Printers
13E2-K 1.3m 2-Head DTF Printer with Auto Powder-Recovery Shaker
The 13E2-K is a 1.3m DTF printer with 2 Epson I3200 heads (one colour, one white) and a Hoson board, printing 1300mm wide at 2400DPI, about 10.4㎡/h in 6-pass and 7.8㎡/h in 8-pass mode. It pairs with Taotech's patented auto powder-recovery shaker for wide-format DTF production.
- Print width
- 1300mm
- Print heads
- I3200 head × 2
- Colours
- CMYK + white
DTF Printers
13E3-K 1.3m 3-Head 8-Colour DTF Printer with Auto Powder-Recovery Shaker
The 13E3-K is a 1.3m DTF printer with 3 Epson I3200 heads (three heads, eight colours) and a Hoson board, printing 1300mm wide at 2400DPI, about 10.4㎡/h in 6-pass and 7.8㎡/h in 8-pass mode. It pairs with Taotech's patented auto powder-recovery shaker for wide-format DTF production.
- Print width
- 1300mm
- Print heads
- I3200 head × 3
- Resolution
- 2400DPI
DTF Printers
13E4-K 1.3m 4-Head DTF Printer with Auto Powder-Recovery Shaker
The 13E4-K is a 1.3m DTF printer with 4 Epson I3200 heads (two colour, two white) and a Hoson board, printing 1300mm wide at 2400DPI, about 21.1㎡/h in 6-pass and 15.7㎡/h in 8-pass mode. It pairs with Taotech's patented auto powder-recovery shaker for wide-format DTF production.
- Print width
- 1300mm
- Print heads
- I3200 head × 4
- Colours
- CMYK + white
DTF Printers
13E5-K 1.3m 5-Head 12-Colour DTF Printer with Auto Powder-Recovery Shaker
The 13E5-K is a 1.3m DTF printer with 5 Epson I3200 heads (three colour, two white (12 colours)) and a Hoson board, printing 1300mm wide at 2400DPI, about 10.4㎡/h in 6-pass and 7.8㎡/h in 8-pass mode. It pairs with Taotech's patented auto powder-recovery shaker for wide-format DTF production.
- Print width
- 1300mm
- Print heads
- I3200 head × 5
- Resolution
- 2400DPI
DTF Printers
13E5-K 1.3m 5-Head High-Speed DTF Printer with Auto Powder-Recovery Shaker
The 13E5-K is a 1.3m DTF printer with 5 Epson I3200 heads (three colour, two white) and a Hoson board, printing 1300mm wide at 2400DPI, about 36.2㎡/h in 6-pass and 31.7㎡/h in 8-pass mode. It pairs with Taotech's patented auto powder-recovery shaker for wide-format DTF production.
- Print width
- 1300mm
- Print heads
- I3200 head × 5
- Colours
- CMYK + white
DTF Printers
13E6-K 1.3m 6-Head 8-Colour DTF Printer with Auto Powder-Recovery Shaker
The 13E6-K is a 1.3m DTF printer with 6 Epson I3200 heads (six heads, eight colours) and a Hoson board, printing 1300mm wide at 2400DPI, about 21.1㎡/h in 6-pass and 15.7㎡/h in 8-pass mode. It pairs with Taotech's patented auto powder-recovery shaker for wide-format DTF production.
- Print width
- 1300mm
- Print heads
- I3200 head × 6
- Resolution
- 2400DPI
DTF Printers
60cm 4-Head High-Speed DTF Printer with Auto Powder-Recovery Shaker
This 600mm high-speed DTF printer runs four Epson i3200 heads on a fibre-optic board, printing at 2400DPI, about 20㎡/h in 6-pass and 14㎡/h in 8-pass mode. It pairs with a fully automatic powder-recovery shaker with mesh-belt feeding and an extended, back-baking oven, sized to fit standard doorways.
- Print width
- 600mm
- Print heads
- i3200 head × 4
- Colours
- CMYK + white
DTF Printers
60cm 6-Head High-Speed DTF Printer with 100R Auto Powder-Recovery Shaker
This 600mm high-speed DTF printer runs six fully staggered Epson i3200-A1 heads at 2400DPI, about 30㎡/h in 4-pass, 23㎡/h in 6-pass and 16㎡/h in 8-pass mode, and supports 5-, 9- or 13-colour printing. It pairs with the 100R auto powder-recovery shaker and adds a tension unwinder, backlit inspection and one-to-one head capping.
- Print width
- 600mm
- Print heads
- i3200-A1 head × 6
- Colours
- CMYK + white; 5, 9 or 13 colours supported
DTF Printers
TT-19E4-W 1.9m Mesh-Belt Printer
The TT-19E4-W is a 1.9m mesh-belt printer with four original Epson heads (I3200-A1 or 4720) in a staggered layout, printing at 1440DPI in CMYK plus white. Material rides on a mesh belt over an ultra-wide zoned-suction platen driven by a high-precision reducer, with a powder shaker and drying unit to complete the line.
- Print width
- 1900mm
- Print heads
- I3200-A1 / 4720 × 4
- Colours
- CMYK + white
Leather Printing Equipment
TT-22E3-W 2.2m Water-Based Dark Leather Printer
The TT-22E3-W is a 2.2m water-based dark leather printer with I3200-A1 or 4720 heads, printing at 2880DPI with C, M, Y, K, W plus a treatment solution and eco-friendly water-based ink. It prints directly on dark leather, soft film, microfibre, yoga mats, wood-grain flooring, artificial leaves, PVC, PU and more.
- Print width
- 2200mm
- Print heads
- I3200-A1 / 4720
- Colours
- C, M, Y, K, W + treatment solution
Leather Printing Equipment
TT-19E4-W Leather Printer
The TT-19E4-W is a 1.9m roll-to-roll leather printer with four I3200U1 heads and 1440DPI resolution, available in 4-, 6- or 8-colour configurations. It prints designs on leather, vehicle vinyl, soft film and other roll materials, with a large dryer and take-up system for wood-grain, artificial leaf, bag, apparel and footwear materials.
- Print width
- 1900mm
- Print heads
- I3200U1 × 4
- Colours
- CMYK 4 colours / 6 colours / 8 colours
Leather Printing Equipment
19E3-W 1.9m Water-Based Dark Leather Printer
The 19E3-W is a 1.9m water-based dark leather printer with three Epson i3200 heads and a Hoson board, printing at 2880DPI, about 20㎡/h in 4-pass and 14㎡/h in 6-pass mode. Using CMYK plus white and a treatment solution with leather-specific water-based ink, it prints directly on dark leather with no VOCs, and adds belt transport, automatic belt correction and high-power drying.
- Print width
- 1900mm
- Print heads
- i3200 head × 3
- Colours
- CMYK + white + treatment solution
Leather Printing Equipment
TT-22E4-W 2.2m Water-Based Dark Leather Printer
The TT-22E4-W is a 2.2m water-based dark leather printer with I3200-A1 or 4720 heads, printing at 2880DPI with C, M, Y, K, W plus a treatment solution and leather or eco-solvent ink. It prints directly on dark leather, soft film, PU and similar materials.
- Print width
- 2200mm
- Print heads
- I3200-A1 / 4720
- Colours
- C, M, Y, K, W + treatment solution
Consumables & Accessories
Gilding Varnish
Gilding varnish is the varnish used with gold foil on UV DTF crystal labels. It cures fast with strong adhesion, adds a high-gloss finish that brightens the gold foil, has low odour, and stays waterproof and firm outdoors.
- Type
- UV gilding varnish
- Packaging
- 1L
- Use
- Gold foil stamping on UV DTF crystal labels
Consumables & Accessories
DTF Pyrograph Ink
DTF pyrograph ink is the CMYK and white ink set for DTF printers. It gives bright colour with a broad gamut and strong white-ink hiding power; prints feel soft, stretch well, and have sweat-stain fastness above grade 4 with good wear, light and wash resistance. Transfers are pressed at 130–170°C for 10–12 seconds.
- Type
- DTF (pyrograph) ink
- Packaging
- 1L
- Colours
- C, M, Y, K, White
Consumables & Accessories
Water-based Ink
Water-based ink gives a vivid, realistic colour gamut and smooth printing with particles under 0.2 microns. It is made from imported raw materials, is environmentally friendly and low in odour, and stays stable outdoors; typical uses include phone cases, leather, ceramic tiles and flexible light boxes.
- Type
- Water-based ink
- Particle size
- Under 0.2 microns
- Raw materials
- Imported, environmentally friendly
Consumables & Accessories
Weak Solvent Ink
Weak solvent ink prints bright, saturated colour with strong adhesion for advertising and decoration. It is used for focus advertising posters, decorative posters and background walls that can be printed and replaced at will, and for decorative patterns.
- Type
- Weak solvent ink
- Packaging
- 1L
- Suitable for
- Indoor advertising media and decorative materials
Consumables & Accessories
Sublimation Ink
Sublimation ink (thermal sublimation ink) prints bright, saturated colour onto heat transfer paper, which is then pressed onto textiles and other materials. It is used for advertising posters, decorative posters and background walls, garments and home textiles such as bedding.
- Type
- Thermal sublimation ink
- Packaging
- 1L
- Suitable for
- Heat transfer paper and indoor media
Consumables & Accessories
Leather Ink
Leather ink is a vivid-colour ink for printing leather and many other materials. It has a wide, realistic colour gamut, flows smoothly with particles under 0.2 microns, and stays stable in different weather, so one ink can print leatherwear, phone shells, carpets, light boxes, PVC and wall cloth.
- Type
- Leather printing ink
- Packaging
- 1L
- Particle size
- Under 0.2 microns
Talk to an application specialist
Find the right printing system for your application
Tell us about your material, process and output goals. Our team will help narrow the options.